In the beginning, the advice of the professionals is that before setting the parquet floor it needs to be unpacked for at least 24 hours in the place where it will be placed. Avoid keeping the parquet directly in the sun or directly on the concrete surface. The wood needs to “breathe,” and you need to be careful not to dry it out or change its color on the sun.
Before starting the parquet setting, you need to check the base. It must be straight and dry. The permissible humidity of the substrate is 2 percent, and if the substrate is not flat, you need to level it. If it is necessary, under the parquet floor, you can install insulation for sound absorption as well as a foil as a steam boiler in the rooms underneath where the uncured spaces (basement, stairs, etc.) are located. These insulations are purchased in rolls and are easily placed on the substrate.
How the parquet is installed
1. On a flat and dry surface, pull out the direction of the first-row installation. Slacken the adhesive on the surface and start setting the parquet. Make sure the parquet is about 1 cm (0.39 inch) away from the wall and secure it with pegs. Free space to the wall will allow the parquet to move due to swelling or shrinkage with the change of humidity in the room. You need to check the direction of the first row of parquet with the help of the canopies. Set the fixing bolts at 1 cm (0-39 inch) from the wall
2. To fit the last piece of parquet properly in a row, use a steel pile profile.
3. Start the second row with the rest of the previous one.
4. Drill holes for radiators. Cut the last part and seal it in place with glue.
5. Place the parquet at the ends of the room with the help of a steel pile profile.
6. The remains of the glue remove from the parquet with a slight spatter or wet cloth.
7. In the end, tape or screw the corner battens. Slide or screw the moldings on the wall and not on the parquet floor to allow the “work” of the parquet itself. The average height of the slats is about 3.5 cm (1.3 inches), but for aesthetic purposes, we recommend those higher heights.
Make sure that the adhesive is not applied to the entire surface at one time but gradually to smaller surfaces. Professionals advise you to use high-quality adhesives because, in addition to good adhesion, they are odorless, so you do not wait for days for unpleasant smells from the apartment to disappear.
Everything expires with time, but how can you be completely sure that a particular object in your home is ripe for replacement, and when to throw it in the trash? When you consider the situation on the domestic real estate market, it’s clear to you why this decision is quite important. Recent research has shown that it is often worth paying more to invest in a minor repair before selling a flat than investing in a complete replacement. To begin with, you need to sit down to consider the home budget and measure the relationship between short-term and long-term costs. For additional help, we bring out the most controversial items. If you are not quite sure how to solve your problem, it is best to call professionals.
Electricity savings can in itself justify replacing the fridge or dishwasher. Replacing an antique refrigerator model with a brand new model can save up to 40 percent of the electricity. The new ecological washing machine will use over 40 percent less electricity than ordinary because it needs to heat a small amount of water. If your devices are still in good condition and you do not need replacement, you can create a small redevelopment project such as adding a miniature school board to the refrigerator wall where you can write which groceries to buy.
Windows that are not good enough
A quarter of the total heating or cooling costs are leaking through the holes on the windows. The good news is that you can improve the efficiency of existing windows and avoid quite high costs of installing new ones. It is important to detect potential trouble spots, fine-tune and repair window sills, and to add adequate isolation from weather imperfections. If you notice that none of the repairs have helped, it’s a signal that you may still have to invest in new windows.
Doors that are not quite right
Solid and high-quality external doors should last as long as the house they are on. You can correct most problems yourself in a cost-effective way, which is good news as the new door is a surprisingly expensive investment. As in the case of a window, the most important thing is to start a detailed overview and find out where the most air enters. You can solve smaller cracks with a sticky tape that is cheap and excellent for this type of repair. It is important to make sure that the doors are well put in place and that they are well centered.
A faucet that is leaking
Most leaks are solved simply, with the screwdriver and some spare parts. If your faucet breaks down every couple of months and after you have made all the possible repairs that were needed, it would be best to opt for a new model. Experts do not recommend taps with plastic parts, while the brass option is the most cost-effective choice.
Replacing your system if it’s more than ten years old or it’s not keeping you comfortable, or when you are paying your bills more than you think that you should, can save you a lot of money in the long run. Multiply age of your unit by the costs of the repair and if that number if equal or greater then 5.000 you should consider replacing the system.
You can’t take your HVAC systems for granted, and we know that as long as they are working, homeowners are too often content to leave them alone, without any service. What they don’t know is, that can be the reason they are losing money due to system inefficiency. Even if it isn’t broken, maybe it’s time for you to consider a system upgrade.
Before you give money to the new HVAC system away, it can be a good idea to check your house and system for air leaks. Windows, doors, insulation can be a big problem, but the cost of repairing or replacing them may be a lot less expensive to treat. When you have a properly insulated home and sealed leaks, heating and cooling system run much more efficiently. After that, you may realize that you don’t need new system after all, or if you do replace it, the new one will save you a lot of money when the energy bills come in the future.
Instal programmable thermostats, and you have the power to program temperatures in your home. Now you can plan your temperatures for the day and night, and you do not pay for heating or cooling that you do not use because you are at work. You can program the temperature you need and program it to increase or decrease before you are back. Also, newer systems will give you reminders about service that is needed or when you need to replace an air filter.
If your cooling or heating system needs to be upgraded, just give us a call, and we are there for you.
Primarily, there is a need to learn something and the will to try something new. At the very beginning you need a certain financial investment that will certainly pay off because once you have purchased the necessary tool, it will last for years. Of course, it is assumed that you will buy quality and proven tool and equipment that will not let you down when you start to repair and improve your home.
Learn it all on the internet
You will not believe it, but on Youtube footage, you can find everything you are interested in about small or large apartment improvements, repair, and renovation. We advise you to look closely at how they did it in the tutorial so that you later try to do it yourself.
What jobs can you do on your own?
Painting the walls in your apartment is a very easy way to refresh and change the look of your place. The job itself is not too complicated or difficult if you do not have some special requirements and techniques that only a professional can do. Like any experienced painter, you will need to protect your furniture and floors.
Painting carpentry can be hard and boring, but it all depends on how you look at things. If you have the ultimate goal in mind, and you want a better look of your living space, everything will be easier. Preparing the substrate for painting or removing the old paint is often a longer part of the job than the painting itself. If you want to be your handyman and boast that the new color of doors, windows or old furniture pieces is your hands work, it is necessary that you have the right tool, precise hands, and sharp eyes.
You do not have to take your car for every little thing to the repair shop. We do not advise, of course, to skip small or large services and to visit a car mechanic in the event of any major failure, but you can replace the tires or bulbs themselves.
We present you the complete guide to maintaining wooden furniture and interior surfaces, in the form of practical tips to solve the eight most common problems.
Rehabilitation with lemon and olive oil
Keep in mind that there are parts of the furniture that is not visible because if you ignore them, there will be damage that will increase over time. This is a simple, inexpensive and completely natural technique for removing stains from wooden furniture, and it will get a completely new shine. All you have to do is store two tablespoons of olive oil with two tablespoons of lemon juice, and wipe it well in a bowl. Apply on the cloth these ingredients. Allow the wood to absorb for about 10 minutes, and then go over the greased surfaces with a clean cloth again. This combination will clean your furniture, but it will also feed it.
The maintenance with paraffin oil
To properly maintain antique furniture pieces, it is enough to wash them once in two months with a cotton cloth on which you poured linseed oil in small quantities. Paraffin oil that does not have color or smell is ideal for this application. It is extremely cheap, and you can find it in any paint store.
Any piece of wood furniture can be restored. You probably have some cabinets that you keep for sentimental reasons. You can dress them up and at the same time have fun. You will need a primer, paint, and varnish. We recommend ecological coatings on a water base that do not have unpleasant odors and are very easy to use. By using these coatings, the work will be a pleasure, in which you will not endanger our health and pollute the environment.
It is a common case that the wax will end up on a table or some other wooden object in your home. First, put the ice cube on the wax so it can harden completely. Gently remove as many of it as possible with a plastic card or some other non-abrasive object. Then simply take a clean, soft cloth on which you have a little wood wax to make your furniture shine again. Another way to remove it is by using a hairdryer. Adjust it to medium volume and point to a dirty place. When the wax begins to melt, pick it up with a soft cloth, clean the cleaned place with diluted vinegar and polish as usual. This technique has fewer risks.
Avoid using any soap on a natural tree because it will take away its natural glow over time. On the market, there are special oils for wooden furniture in two shades (darker and brighter). It is enough to rub them gently once a month with a cotton cloth on all surfaces of natural wood, and then rub again with a dry cloth.
Over the years, you put a lot of coats of paint on your walls. It creates a layer of thickness that, when it gets too big, is creating a rather uneven surface on your wall that can be spotted immediately. It also can happen that your paint starts to drop out of your walls, ceilings …
Do you have old and worn-out roof windows? Are you finally thinking of a replacement? These are the steps you must keep in mind if you want security, comfort and a pleasant ambiance under your roof. It is all you need to know to do it yourself. Removing the old window The first step is …
We present you the complete guide to maintaining wooden furniture and interior surfaces, in the form of practical tips to solve the eight most common problems. Rehabilitation with lemon and olive oil Keep in mind that there are parts of the furniture that is not visible because if you ignore them, there will be damage …
Primarily, there is a need to learn something and the will to try something new. At the very beginning you need a certain financial investment that will certainly pay off because once you have purchased the necessary tool, it will last for years. Of course, it is assumed that you will buy quality and proven …
With a little physical effort and some knowledge, you can fix small failures yourself, before they turn into an accident that will cost you dearly. Washing machine leaves water If you ignore this malfunction, you might have a flood. Make sure that the water hose is connected to the back of the machine – the …